Temperature and thermal stress analyses of a ceramic-coated aluminum alloy piston used in a diesel engine - ScienceDirect

Both temperature and thermal stress distribution vary with coating thickness.Temperature at the coated surface is significantly higher than that of the unc...

M Cerit，M Coban - 《International Journal of Thermal Sciences》

Simulation of heat transfer processes in a diesel engine equipped with pistons coated by using Galvanic-plasma Method

The work is devoted to the modified quasi-steady method (MQM) for the analysis of a diesel engine piston coated with an aluminum alloy. The oxide-coated piston using a galvanic-plasma modification (GPM) depending on the thickness of...

MS Albdeiri，VV Krasilnikov，SV Sergeyev - 《Iop Conference》

Design and thermal analysis of ceramic coated Mercedes Benz piston

Piston is considered to be one of the important parts of an internal combustion engine. It is a part which bears the pressure of the combustion of the gas inside the cylinder. Normally they are made up of cast iron which bears the gas pr...

MM Shukla，OP Tiwari - 《International Journal of Advance Research Ideas & Innovations in Technology》

Wear and scuffing characteristics of composite polymer and nickel/ceramic composite coated piston skirts against aluminum and cast iron cylinder bores

Piston is considered to be one of the important parts of an internal combustion engine. It is a part which bears the pressure of the combustion of the gas inside the cylinder. Normally they are made up of cast iron which bears the gas pr...

Y Wang，K Brogan，SC Tung

SURFACE-COATING METHOD FOR ALUMINUM MEMBER, SURFACE-COATED ALUMINUM MEMBER, AND PISTON FOR INTERNAL COMBUSTION ENGINE

Provided are: a surface-coating method for an aluminum member endowed both with high thermal insulating properties and high thermal equalizing properties; a surface-coated aluminum member; and a piston for an internal combustion engine. ...

H Murakami，M Fujita，M Nakamura

PISTON WITH BI-METALLIC DOME

In another form, an aluminum coated stainless steel layer is used to form the dome. In one form, an ablation casting process may be used to manufacture the dome.JOSEPH C. KOPCHICKMARK A. OSBORNE...

JOSEPH C. KOPCHICK，MARK A. OSBORNE

A method for coating a surface of an aluminum component, a surface-coated aluminum component, and the piston for an internal combustion engine

Are provided a method for coating a surface of an aluminum component, a a surface-coated aluminum component, and a piston for an internal combustion engine...

M Fujita，M Nakamura，H Murakami

Numerical investigation of thermomechanical behavior of Yttrium barium zirconate-coated aluminum alloy piston in an internal combustion engine

Yttrium barium zirconate coating enhances engine thermal efficiency.0.2mm coating reduces piston surface temperatures by 15%.Coating ensures 10.3% thermal ...

SN Khan，A Usman，MS Afzal，... - 《Applied Thermal Engineering》

Aluminum part, e.g. a piston, is surface treated to form a sliding film

aluminum or an aluminum alloy coated with a 1-100 mu m thick surface sliding film consisting of 1-100 mu m size aggregates, each of which is formed of <= 1 mu m size micro-crystals; and (v) an aluminum surface treatment ...

M Makoto，N Masaya，M Shigehi - DE