Deposition of metastable Ti(1-x)AlxN films by plasma-enhanced CVD

阅读量:

30

作者:

R PrangeD Neuschütz

展开

摘要:

Ti(1-x)AlxN films have been deposited by means of PECVD from gaseous mixtures of TiCl4-AlCl3-N2-H2-Ar in a pulsed DC glow discharge. In comparison to PVD processes usually used for the deposition of Ti(1-x)AlxN, PECVD facilitates the coating of complex-shaped geometries. Depending on the Al/Ti input ratio the chemical composition of the films as determined by EPMA was between Ti0.75Al0.25N and Ti0.09Al0.91N. The crystallographic structure was examined by thin film XRD. All coatings exhibited the cubic structure of TiN with a 100 texture and were single-phased. Their lattice parameter decreased with increasing Al content. SEM micrographs of the cross sections revealed a fibrous structure for the film with x = 0.25 and a fine grained morphology for films with higher Al content. Cone-shaped structures are embedded in the films. They are attributed to the formation of particles in the gas phase which stick to the surface and grow competitively with the layer. The deposition rate decreased with increasing Al content of the feed gas, attributed to a slower decomposition of AlCl3 than TiCl4 in the discharge. The microhardness of the coatings increased with increasing Al content from 2403 HV0.05 for x = 0.25 up to 4289 HV0.05 for x = 0.91.

展开

DOI:

10.1051/jp4:19998103

被引量:

3

年份:

1999

通过文献互助平台发起求助,成功后即可免费获取论文全文。

相似文献

参考文献

引证文献

来源期刊

引用走势

2000
被引量:1

辅助模式

0

引用

文献可以批量引用啦~
欢迎点我试用!

引用